What are ceiling medallions?

A ceiling medallion is an ornamental decorative feature, usually round in shape, that is used to dress up a ceiling. … Today, ceiling medallions are still popular for large rooms in more stately homes and are especially useful as a transition between a hanging ceiling fixture and a plain ceiling surface.

What is the right size ceiling medallion?

So, for example, a room that is 12 feet wide and 12 feet long would be 144 square feet. Divide this number by seven and round this off, the result will be 20. Consider this number as inches and the ideal size for the ceiling medallion for this particular room would be about 20 inches.

What color should a ceiling medallion be?

The boldest relief of a ceiling medallion will also be its highest. Reflections from careful touches of gloss gold or silver highlights will attract the eye to these finest features. Gold and silver are neutral colors that work well with all colors, but gold tends to work best on warm colors and silver on cool ones.

How do you attach a ceiling medallion?

1. Step 1 // Remove the existing fixture. …
2. Step 2 // Caulk the backside of the medallion. …
3. Step 3 // Wire the light fixture. …
4. Step 4 // Center the medallion. …
5. Step 5 // Install a few finishing nails. …
6. Step 6 // Fill the nail holes, sand, and touch up the paint. …
7. Step 7 // Finish installing the light fixture.

How do you secure a ceiling medallion?

Apply a heavy bead of adhesive caulk to the back of medallion; press the medallion against ceiling. 6. Secure medallion to ceiling with screws, but don’t over-tighten. The screws are needed primarily to hold the medallion in place until the adhesive dries.

Can you cut ceiling medallions?

Make sure the medallion will fit flush. If the box pushes against the medallion, you will need to trim the medallion. You can mark where you need to trim by putting some lipstick on the edges of the electrical box so that it will mark the medallion where you need to trim it.

What are ceiling medallions made of?

A: Ceiling medallions once were made primarily of plaster, or sometimes carved wood. Today, they’re usually high-density urethane foam, which manufacturers sometimes describe as polyurethane or PVC plastic. But the urethane type is rigid.

Can I remove a ceiling rose?

Removing a decorative ceiling rose requires no special tools or expertise, but it will damage the ceiling. Old plaster rosettes or medallions, which are more common terms, were bonded to the ceiling with wet plaster. Newer plastic or foam versions are usually glued with construction adhesive.

What size should a ceiling medallion be for a chandelier?

Use a tape measure to measure both the length and width of the room. Multiply the length and width together and then divide by seven to estimate the medallion size in inches. For example, a 12-by-12-foot room could use a medallion size of 21 inches. Take into account the ceiling height of the room as well.

How do you remove ceiling medallions?

To remove a medallion, climb a ladder with a sharp utility knife or razor blade mounted in a scraper-style holder, a wide putty knife or taping knife, and a smaller putty knife or, even better, a small pry bar with a thin blade, such as a Sharkgrip pry bar (www.sharkcorp.com).

How do you paint polystyrene ceiling roses?

Most of the polystyrene trim pieces have a white coating already applied. This can be painted over with acrylic latex. If no coating is present use a latex primer. Some suggest using a latex primer first to aid in color uniformity.

How do you paint a gold chandelier?

2 Simple Steps to an Antique Gold Chandelier Finish

1. STEP 1: SPRAY. Give it a coat of paint with my favorite spray paint in gold leaf. While this works perfectly on smaller items, it just seemed too flat on the larger chandelier.
2. STEP 2: WAX. Rub on Annie Sloan’s dark wax! This is so quick and easy and really makes the chandelier gorgeous.

How do you paint a ceiling light fixture?

1. Step one – Turn off the electricity to the light. Turn off the light switch and breaker for the light. …
2. Step Two – Tape off the area. …
3. Step three – Clean the light fixture before painting. …
4. Step four – Apply paint. …
5. Step Five – Reassemble the painted light fixture.

How do you modernize an old chandelier?

Upgrade an Outdated Chandelier

1. Apply Spray Paint. If you have a dated chandelier (Image 1) that you’d like to give a distinctive and classic look, begin by spray-painting the chandelier using a nice antique paint finish (Image 2). …
2. Add Decorative Candle Sleeves. …
3. Add Hanging Crystals.

Is it safe to spray paint a light fixture?

So if you’re looking to do the same with a new (or old) fixture, taping it off and giving it two even coats of spray paint should do the trick. Just be careful when transporting it and installing the light so you don’t scratch any of the paint off.

Can I spray paint a chrome light fixture?

Shake the chrome-colored spray paint 10 to 20 times — or per manufacturer’s instructions — to ensure that the paint is well-mixed. Spray a light coat of paint on the surface of the light fixture. Spray the paint beyond the fixture when you release and spray slightly before the light fixture when you restart.

How do you make an old light fixture look new?

How to Update Light Fixture Shades – the Right Way!

1. Step 1: Remove the Bulb and Old Light Fixture Shade. Turn off the light and unscrew the light bulb. …
2. Step 2: Spray Paint the “Hardware” …
3. Step 3: Paint the Threaded Sockets of Your Light Fixture. …
4. Step 4: Light Fixture Makeover Assembly.

What kind of paint do you use on a light fixture?

Spray paint – rustoleum metallic works great! Remove light bulbs, screws and glass coverings. I used a standing lamp for light since this was in my bathroom and there are no windows. Use newspaper and painters tape to tape all around the light fixture.

Is there a special paint for glass?

At least three types of paint may be used on glass: acrylic enamel, acrylics marked as suitable for tile or glass, and specially formulated solvent-based paints. Your local store is likely to carry a range of options (view example on Amazon).

How do you permanently tint glass jars?

Method #4 Tinted Glass Jars with Acrylic Paint Pour some acrylic craft paint into your jar. Rotate it until the inside is covered. Turn over your jar and let extra paint pour out. Let dry upside down until paint is dry.

How do you permanently paint on glass?

Permanently Paint Glass Dishes

1. Step 1: How to Permanently Paint Glass Dishes. …
2. Step 2: See the video tutorial.
3. Step 3: You’ll need. …
4. Clean your glass with alcohol. …
5. Draw a 1/2″ square grid on the FRONT of the plate. …
6. Paint stripes on the base of the wine glass. …
7. Place the dishes in the oven and bake at 325˚ for 30 minutes. …
8. Step 8: You’re done!

What seals acrylic paint on glass?

To seal acrylic paint on glass, purchase an acrylic sealant that is suitable for use on glass surfaces. Choose a glass paint sealer with a glossy finish (rather than a matte finish) for best results. These types of sealant are available in spray-on or brush-on formulas.