Press "Enter" to skip to content

How long do wood shingles last?

30 years

Are wood shingles good?

Chemically treated wood will outlast untreated shakes and shingles and a shake will survive longer than a shingle. Both asphalt and treated wood shingles can survive up to 30 years on a roof, given ideal conditions. Durability Cedar shingles are resistant to insects but not large amounts of rain.

What is the difference between wood shingles and wood shakes?

Wood shake refers to wood roofing material that is created by splitting thin rectangles from a wooden log. … Wood shingles are sawn on both sides and are thinner at the butt end when compared to a shake. Wood shakes are typically sawn on one side and hand split on the other side, making them thicker than wood shingles.

What wood is best for shingles?

White oak, black locust, honey locust, redwood, cedar, rock elm, yellow poplar and osage orange all are good shingle or shake wood. There is a shingle oil for treating them, or just plain will work. On wood shingles or shakes, most of the time a third of the wood is exposed, so it takes lots of wood to cover a roof.

What is the best shingle to put on your house?

Asphalt Roofing Shingles

Are wood shingles waterproof?

Wooden shingles, on the other hand, are not waterproof. They’ll absorb water due to their porous surface. These shingles (or “shakes”) are not very common in this part of the country but occasionally people like the look of them and want them on a house. There’s more to a roof than just the shingles, though.

How do wood shingles work?

To produce shakes, manufacturers split thin sheets from dried logs or planks, so one side always has a longitudinal pattern that follows the wood grain. Shingles, on the other hand, are sawn on both sides. This makes them more regular and symmetrical, but it leaves cross-grain saw marks on both surfaces.

Can water soak through shingles?

Instead of flowing down the roof, into the gutter system and onto the ground, huge amounts of water stays atop longer and can potentially soak through the starter shingles on your roof.

What goes under cedar shingles?

Synthetic underlayment: With modern improvements and manufacturing techniques, synthetic underlayments are now considered the best material installed under cedar shingles. Synthetic underlayments are made from polyester, fiberglass and polypropylene.

How much space do you need between cedar shingles?

Leave a keyway space of at least 1/8” between shingles. The edges must not touch. 7. Use 2 fasteners per shingle at about 3/4” from each edge, and at 1” above the butt- line of the overlapping shingle.

Do you nail or staple shingles?

Fasteners for asphalt shingles should be roofing nails or staples. The head of a roofing nail or the crown of a staple is what actually holds a shingle in place. … If staples are properly installed, they offer nearly the same wind resistance as nails.

Which side of cedar shingle faces out?

The face you like best is the one that should be installed exposed to the weather. (Note: Machine grooved shingles are installed with the grooves exposed to the weather).

Can you use a nail gun on cedar shingles?

Use either rust-resistant staples or shingle nails (1-1/4” to 1-1/2” long), galvanized, in stainless steel or aluminum”. … It simply means that the best nail gun for cedar shingles will either be a stapler nail gun or any nailer that can shoots the recommended nails or staples!

Can you use a brad nailer for shingles?

Large-body nailers typically include framing nailers and roofing nailers. These nailers are used for more technical projects such as framing out a basement or installing roofing shingles. … For woodworking projects, a brad nailer is a good choice. If you‘re constructing a fence, a framing nailer is a good option.

Can you staple cedar shingles?

The Cedar Shake & Shingle Bureau prefers the use of nails, however if you choose to use staples they must be stainless steel Type 316 in locations within fifteen (15) miles of salt water. For locations outside of the salt water zone – stainless steel staples Type 304 or Type 316 must be used.

Is cedar breather necessary?

Not only is it worth it, it is necessary. Cedar shakes/shingles need to have airflow underneath them so that they dry out evenly. During a good soaking rain cedar will absorb a lot of water, if they dry unevenly after a while they will start to curl and split.

Is cedar shake siding expensive?

Cost Basics. The average cost to install cedar shake siding ranges from $8.

How much does it cost to side a 2000 sq ft house?

Siding costs between $3 and $11 per square foot with the average homeowner spending $4,300 to $15,800 to install on a 2,000-square-foot home. The total cost to replace siding depends on the size of your home, the number of stories, and the materials used.

How many years does cedar siding last?

Cedar siding must be properly maintained at all times to reach its maximum lifespan, with many planks needing to be replaced after just 10 to 15 years, and even well-maintained cedar siding may only last around 20 to 30 years in some climates.

What’s the difference between cedar shakes and shingles?

Cedar shakes are split off while shingles are sawn smooth on both sides and cut tapered. Lastly, shakes are thicker than shingles. Durability – Generally speaking, cedar shakes are more durable and last longer than shingles because they are thicker and made from premium grade wood.

Should you power wash cedar shingles?

Non-professionals should not pressure wash shingles. High pressure can remove wood fibers and drastically shorten the life of the shingles. Applied incorrectly, it can also force water into the places behind the shingles, which could lead to rot and mold.

How much does it cost to reside a house with cedar shingles?

The average cost to install cedar shingle siding ranges from $6 to $15 per square foot. You can expect to pay between $10,200 and $24,600 for a licensed contractor to install new cedar shingle siding on a typical house. This includes the cost of having a contractor remove the existing siding.

Do cedar shingles need to be treated?

While maintenance and treatments are not necessary, it is something to really consider. To be able to ensure the longest life possible, a cedar shake roof requires careful, dedicated maintenance. To help preserve its longevity, you’ll need to apply a treatment, which you’ll also need to reapply when necessary.

Can you leave Cedar untreated?

Cedar has natural antibacterial and anti-fungal properties, allowing you to leave the wood untreated without worry of excess warping, rotting and cracking. It does weather, though, changing color throughout time, offering a much more rugged look than stained cedar siding offers.

Why do cedar shingles turn black?

There are two main causes of the darkening of cedar siding: tannin stains, and mildew stains. If the darkening is caused by mildew, the bleach will immediately clear it up.

How do you keep cedar shingles from turning GREY?

To prevent the cedar from fading to gray, you need to treat the fence with a stain that blocks ultraviolet light and contains a mildewcide. The stain should be transparent or semi-transparent to let the natural wood coloring show, and oil-based so the stain will penetrate into the wood.