How far down should a valance hang?

Another rule of thumb used by decorators is that the window valance depth should be 1/4 of the overall window height, plus 1 inch. A 60-inch tall window, then, would call for a 16-inch deep valance, while a 48-inch window calls for a valance about 13 inches deep.

How high do you hang 84 inch curtains?

When you buy them in stores or online, there are two standard lengths: 84 inches and 95 or 96 inches. The length of the curtain dictates the height of the rod. If you buy 84–inch-long curtains, the rod must be mounted roughly 84 inches from the floor if the curtains hang from the rod without rings.

What can I do if my curtains are too short?

With adding curtain rings and lengthening the bottom edge of your curtains, you can add several inches on length to your short curtains. Remember those short blue curtains from the first picture? Check out how much length I was able to add by attaching curtain rings and redoing the bottom seam!19-Feb-2020

What length curtains do I need for 8 foot ceilings?

about 91 inches

Can you hang curtains on crown molding?

If you have crown molding, mount the curtain rod right beneath the crown molding. If the window is less than 6” from the ceiling, and there is no crown molding, then ceiling mounting the drapery is best.

How do you hang curtains on windows without molding?

Besides holding raincoats and bags, they can also be used to hang curtains. To install them, intersperse the coat hooks at an even distance across the window. Loop the holes through each hook to hang your curtains. Coat hooks are easier to hang than traditional curtain rod hardware and don’t require drilling.

How far can a curtain rod span?

Over 96 inches, a third rod bracket is required as a center support; this is mandatory! Having said that, a 2 inch or 3-inch diameter pole can span a distance up to a full 12-feet without flexing or bowing using only two end brackets.

How do you hide curtain rods?

5 Great Ways To Cover A Curtain Rod

1. Use brackets and cornice: Any horizontal decorating molding called cornice is a great way to cover a curtain rod. …
2. Use a pelmet to cover that not-so-pleasing curtain rod. …
3. A valance: Just like a pelmet, a window valance covers the uppermost part of a window and it’s known for being an excellent covering for a curtain rod.

Can you use clip rings on rod pocket curtains?

Hooks or curtain ring clips can be used on rod–pocket curtains. … Specialty curtain rings with clips attached allow you to hang any type of lightweight or medium-weight curtains from a curtain rod.

Can I hang regular curtains on a traverse rod?

Traverse rods make it easy to open and close the drapes. An intermediate skilled home sewer can utilize drapery maker tricks and successfully hang non–pinch-pleated drapes on a traverse rod, hiding the pins and providing enough support for the weight of the drapes. … The weight of the drapes hangs on the pins.

How do you attach drapery rings?

Use a pin that loops through the plastic thread and hooks onto the ring. Hanging pins create a look that’s polished from the front — no toothy clasps on your panel — and they move smoothly over your drapery rod. You can see the clear plastic loops that securely hold the panel.