Press "Enter" to skip to content

Start Searching the Answers

The Internet has many places to ask questions about anything imaginable and find past answers on almost everything.

Can you drill masonry with a cordless drill?

In most cases, yes. While a cordless drill will not be as effective in drilling through concrete, it can get the job done. … A standard cordless drill has numerous applications when it comes to our home small projects, and surprisingly, it can be used to drill into stone or masonry.

Can you drill through concrete without a hammer drill?

A regular drill on its own isn’t all that effective when it comes to drilling into concrete. But, when combined with masonry drill bits, a nail, and a ton of time and dedication, you can technically use a regular drill when it comes to concrete drilling.

How do you install masonry screws?

Drill a pilot hole at the proper location with a hammer drill and masonry bit to the depth your screw will penetrate. Tap the plastic anchor into the hole. It should fit snugly but drive in easily with a hammer. If the hole gets a bit large, use a bigger screw to push the plastic against the walls of the hole.

What screws to use to mount a TV to Brick?

How to Mount a TV on a Brick Wall

  1. Hammer Drill.
  2. Level.
  3. 3/16″ Masonry Drill Bit.
  4. Impact Driver.
  5. 1/4″ Masonry Screws.

What size drill bit do you use for a 3/16 Tapcon?

5/32”

What size drill bit do I need for a 5/16 Tapcon?

The 3/16” tapcon uses a 5/32” bit, the 1/4” tapcon needs a 3/16” diameter bit, the 3/8” tapcon requires a 5/16”, the 1/2” tapcon requires a 7/16” bit, a 5/8”tapcon needs a 1/2” bit and the 3/4” tapcon requires the use of a 5/8” carbide tipped bit.

How big a pilot hole should I drill?

If you are creating a pilot hole for a nail, the right drill bit is slightly smaller than the nail’s shank. If you are creating a pilot hole for a screw, the drill bit should be the same size as the body of the screw—not including the threads.

Should you pre drill coach screws?

How do I use a Coach Screw? Timber: All coach screws require a pilot hole, using a general purpose drill bit such as a Twist Drill Bit, before they are screwed into place, preventing the wood from splitting. … So for example when using an 8mm coach screw the pilot hole needs to be 4mm for softwood and 6mm for hardwood.